You enjoy riding the streets on your motorcycle. It’s a real feeling of freedom to have the wind whipping around you. However, if you want to keep your bike on the road, motorcycle servicing is important. By performing some basic maintenance, you can keep your cycle running indefinitely.

split it right

If you want to start maintaining your bike, you need to fit it properly. The most crucial part of your cycle’s engine is how it handles the first few hundred miles. You should also treat the first two thousand carefully.

Check your owner’s manual to find out exactly what limits you should take. Each brand is slightly different, and some have a long list of restrictions, such as the type of oil that must be used for the first few hundred miles. The manual will state what other type of oil, if any, you should use. Some machines require that you not exceed a certain RPM until after a few thousand miles.

Read the Manual

The original manufacturer’s manual will be the best place to get maintenance information. The manufacturer knows what motorcycle service your vehicle needs more than you do. It is important that you read and study it to make sure you know what to do.

Also, you can buy a service manual. This book can cost between $40 and $100. However, it is worth the investment if you want to perform some of the more sophisticated maintenance procedures yourself. This manual includes instructions on things like rebuilding parts on your motorcycle and includes hard-to-find torque values ​​for every bolt on the vehicle.

oil changes

Routine oil changes can extend the life of your engine. It can help ensure your engine maintains proper lubrication. If the oil is old and full of dirt and debris, the oil cannot do its job as it is supposed to.

You should consult the manual to determine how often you should change the oil. If you drive in a dusty or dirty environment, you should probably change it more often.

Aspects

The service of the motorcycle must include the greasing of the bearings. Those who ride dirt bikes learn this maintenance tip early, as new bikes need attention to the steering head bearings and suspension linkages. Also, those who ride street bikes need to get used to this maintenance. Although the sealed bearings are relatively maintenance free, the suspension linkages need regular care.

Sometimes these parts will need to be replaced. While greasing you will have the opportunity to inspect the bearings. In addition to the physical inspection of the bearings, being in tune with your bike and knowing when the front or rear suspension is loose, you will know when to change the bearings.